Your selections have been added.
DIXCEL Rear Brake Rotors - Audi R8 (42/4S) Non-CC Brake - 356x32mm
Upgrade your Audi R8's rear braking performance with Dixcel brake rotors, engineered in Japan and developed through decades of OEM supply and motorsport experience. Dixcel rotors are designed to deliver consistent braking performance, stable pedal feel, and reliable control for daily driving through to more spirited use.
This listing covers the Dixcel brake rotor types shown for the Audi R8 4.2 FSI / 5.2 FSI Quattro (42) produced from 2013 to 2017 and the Audi R8 5.2 FSI Quattro 540ps (4S) from 2016 onwards, fitted with 356x32mm vented rear rotors and standard iron brake calipers.
These are non-split two-piece rotors (drilled, wave type) similar in design to the genuine OEM parts. This rotor style replaces the factory two-piece wave-type rear disc found on later R8 models.
Important: This rotor is NOT compatible with vehicles fitted with carbon ceramic (CC) brakes. If your R8 is equipped with the optional carbon ceramic brake package, this is not the correct fitment. Please check your brake configuration before ordering.
Multiple rotor types are available, ranging from street-focused replacements to higher-performance applications. Use the product options on this page to select the rotor type best suited to your driving style and vehicle configuration.
Rotor Specifications
- Dixcel Part Number: 1387832
- Outer Diameter (OD): 356mm
- Thickness (TH): 32mm
- Height (HT): 43.5mm
- Centre Bore (CB): 68mm
- Bolt Holes: 5+1
- PCD: 112mm
- Type: Vented Disc / Non-Split Two-Piece Wave Type
Vehicle compatibility, OEM part numbers, rotor specifications, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and brake configuration are confirmed before ordering.
Not sure which rotor type is right for your vehicle? Contact our team at sales@dixcelshop.com.au for expert advice.
| Make | Model | Generation | Year | Notes |
|---|---|---|---|---|
| Audi | R8 4.2 FSI / 5.2 FSI Quattro | 42 | 2013 - 2017 | 4.2L V8 / 5.2L V10 / 356x32mm Vented Rear / NOT for CC brake cars |
| Audi | R8 5.2 FSI Quattro (540ps) | 4S | 2016 - onwards | 5.2L V10 / 356x32mm Vented Rear / NOT for CC brake cars |
Product Comparison
Select up to two products below to compare their technical specifications side-by-side.
Premium Type
Excellent braking power and dust reduction for European applications.
EC Type
A premium street pad for JDM cars, made for superior braking feel and low dust output
M Type
Ultra-low dust pad for clean wheels without sacrificing stopping power.
X Type
High stopping power for heavy SUVs. Effective with large diameter wheels.
ES Type
Entry-level sports pad with increased heat resistance and stable braking.
S Type
Street Sports pad ideal for lightweight vehicles. Firm rigid pedal touch.
Z Type
All-round performance. Best match for high grip radial tyres.
RE Type
ABS-compatible racing pad. Minimises ABS intervention for high-grip tyres.
RA Type
Racing pads pursuing high effectiveness and linear control for high-powered cars.
Specom-Ξ²
Endurance racing pad with exceptionally high wear resistance and stability.
Pad Specifications
| Feature | Pad A | Pad B |
|---|---|---|
| Intended Use | β | β |
| Target Vehicle | β | β |
| Friction Material | β | β |
| Bite Coefficient (Β΅) | β | β |
| Initial Bite Feel | β | β |
| Operating Temp | β | β |
| Dust Level | β | β |
| Rotor Wear | β | β |
| Tyre Match | β | β |
| Hardware Included | β | β |
* "YES*" denotes wear sensors are included on primary street applications where applicable. Track-only pads omit sensors due to extreme temperatures.
PD Type
Standard replacement rotor with factory-beating precision and anti-rust coating.
SD Type
Up to 20% more braking power with 6 offset slits for enhanced street and sports driving.
FP Type
Professional plain rotor with advanced heat treatment and 20% more carbon for ultimate crack resistance.
FS Type
The ultimate slotted racing rotor, combining high-carbon durability with enhanced initial bite.
2-Piece Assembly
Floating 2-piece structure prevents thermal judder, cuts weight, and allows outer ring replacement.
Rotor Specifications
| Feature | Rotor A | Rotor B |
|---|---|---|
| Intended Use | β | β |
| Target Stage | β | β |
| Material Structure | β | β |
| Surface Design | β | β |
| Anti-Rust Coating | β | β |
| Heat Treatment | β | β |
| Hub Structure | β | β |
| Key Benefit | β | β |
* Anti-rust coatings inhibit rust but do not completely prevent it on cast iron. Black finishing on 2-piece rotors wears to bare iron on the pad contact surface.
* Note: PD and SD type rotors may feature High Carbon (HC) material depending on the specific car model application.
